I had purchased several different fabrics for this challenge, but settled on a lightweight linen I had in my stash because I really, really wanted to add some fun appliques. I drafted the skirt from my measurements (thanks Whipstitch!), so no store-bought patterns were harmed in the making of this skirt :)
I love piping (really, who doesn't?), so I worked it into the design of the waistband and tiny coin pocket. I considered adding it to the hem as well, but went with another plan (get to that later).
The coin pocket is functional! I don't think it's sewn as elegantly as possible, since a quick search didn't pull up any tutorials (though I might have to write one now, with all my hard-earned knowledge), but it works. While the pocket is big enough for a chapstick, I could probably get away with putting exactly a penny in there, since the skirt is a smidge on the snug side! For the hem, I took decided to try out an idea I had been mulling for a while. While shortening the arms on one of my husband's dress coats, I realized that the lining is sewn in such a way to create the hem, but turning the outside fabric inward. For this skirt, I made the lining using the same pattern as the skirt. Before sewing the lining to the waistband, I cut about 1 inch off the bottom of the lining. Then, with right sides together, I sewed the lining to the linen fabric and pressed the seam flat. The lining was then pinned to the waistband, matching edges, creating a balloon-skirt effect at the bottom. With some sharp shakes, the lining and linen worked themselves out a bit, and with additional smoothing and fanagling (and copious ironing!), the hem was done!
For the applique circles, I traced a ribbon spool, then hand cut and machine appliqued in place. The fabric is some kind of silk/cotton upholstery fabric that I scored at the FabMo fabric giveaway here in Mountain View. The circles continue on the back, too!